hackacad/usr/local/share/bastille/template.sh

#!/bin/sh
#
# Copyright (c) 2018-2020, Christer Edwards <christer.edwards@gmail.com>
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice, this
#   list of conditions and the following disclaimer.
#
# * Redistributions in binary form must reproduce the above copyright notice,
#   this list of conditions and the following disclaimer in the documentation
#   and/or other materials provided with the distribution.
#
# * Neither the name of the copyright holder nor the names of its
#   contributors may be used to endorse or promote products derived from
#   this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

. /usr/local/share/bastille/common.sh
. /usr/local/etc/bastille/bastille.conf

bastille_usage() {
    error_exit "Usage: bastille template TARGET project/template"
}

post_command_hook() {
    _jail=$1
    _cmd=$2
    _args=$3

    case $_cmd in
        rdr)
            if ! grep -qs "${_args}" "${bastille_jailsdir}/${_jail}/rdr.conf"; then
                echo "${_args}" >> "${bastille_jailsdir}/${_jail}/rdr.conf"
            fi
            echo -e ${_args}
    esac
}

get_arg_name() {
    echo "${1}" | sed -E 's/=.*//'
}

parse_arg_value() {
    # Parses the value after = and then escapes back/forward slashes and single quotes in it. -- cwells
    echo "${1}" | sed -E 's/[^=]+=?//' | sed -e 's/\\/\\\\/g' -e 's/\//\\\//g' -e 's/'\''/'\''\\'\'\''/g'
}

get_arg_value() {
    _name_value_pair="${1}"
    shift
    _arg_name="$(get_arg_name "${_name_value_pair}")"

    # Remaining arguments in $@ are the script arguments, which take precedence. -- cwells
    for _script_arg in "$@"; do
        case ${_script_arg} in
            --arg)
                # Parse whatever is next. -- cwells
                _next_arg='true' ;;
            *)
                if [ "${_next_arg}" = 'true' ]; then # This is the parameter after --arg. -- cwells
                    _next_arg=''
                    if [ "$(get_arg_name "${_script_arg}")" = "${_arg_name}" ]; then
                        parse_arg_value "${_script_arg}"
                        return
                    fi
                fi
                ;;
        esac
    done

    # Check the ARG_FILE if one was provided. --cwells
    if [ -n "${ARG_FILE}" ]; then
        # To prevent a false empty value, only parse the value if this argument exists in the file. -- cwells
        if grep "^${_arg_name}=" "${ARG_FILE}" > /dev/null 2>&1; then
            parse_arg_value "$(grep "^${_arg_name}=" "${ARG_FILE}")"
            return
        fi
    fi

    # Return the default value, which may be empty, from the name=value pair. -- cwells
    parse_arg_value "${_name_value_pair}"
}

render() {
    _file_path="${1}/${2}"
    if [ -d "${_file_path}" ]; then # Recursively render every file in this directory. -- cwells
        find "${_file_path}" \( -type d -name .git -prune \) -o -type f -print0 | $(eval "xargs -0 sed -i '' ${ARG_REPLACEMENTS}")
    elif [ -f "${_file_path}" ]; then
        eval "sed -i '' ${ARG_REPLACEMENTS} '${_file_path}'"
    else
        echo -e "${COLOR_YELLOW}Path not found for render: ${2}${COLOR_RESET}"
    fi
}

# Handle special-case commands first.
case "$1" in
help|-h|--help)
    bastille_usage
    ;;
esac

if [ $# -lt 1 ]; then
    bastille_usage
fi

TEMPLATE="${1}"

case ${TEMPLATE} in
    http?://github.com/*/*|http?://gitlab.com/*/*)
        TEMPLATE_DIR=$(echo "${TEMPLATE}" | awk -F / '{ print $4 "/" $5 }')
        if [ ! -d "${bastille_templatesdir}/${TEMPLATE_DIR}" ]; then
            echo -e "${COLOR_GREEN}Bootstrapping ${TEMPLATE}...${COLOR_RESET}"
            if ! bastille bootstrap "${TEMPLATE}"; then
                error_exit "Failed to bootstrap template: ${TEMPLATE}"
            fi
        fi
        TEMPLATE="${TEMPLATE_DIR}"
        ;;
    */*)
        if [ ! -d "${bastille_templatesdir}/${TEMPLATE}" ]; then
            error_exit "${TEMPLATE} not found."
        fi
        ;;
    *)
        error_exit "Template name/URL not recognized."
esac

if [ -z "${JAILS}" ]; then
    error_exit "Container ${TARGET} is not running."
fi

if [ -z "${HOOKS}" ]; then
    HOOKS='LIMITS INCLUDE PRE FSTAB PF PKG OVERLAY CONFIG SYSRC SERVICE CMD RENDER'
fi

# Check for an --arg-file parameter. -- cwells
for _script_arg in "$@"; do
    case ${_script_arg} in
        --arg-file)
            # Parse whatever is next. -- cwells
            _next_arg='true' ;;
        *)
            if [ "${_next_arg}" = 'true' ]; then # This is the parameter after --arg-file. -- cwells
                _next_arg=''
                ARG_FILE="${_script_arg}"
                break
            fi
            ;;
    esac
done

if [ -n "${ARG_FILE}" ] && [ ! -f "${ARG_FILE}" ]; then
    error_exit "File not found: ${ARG_FILE}"
fi

## global variables
bastille_template=${bastille_templatesdir}/${TEMPLATE}
for _jail in ${JAILS}; do
    ## jail-specific variables.
    bastille_jail_path=$(jls -j "${_jail}" path)

    echo -e "${COLOR_GREEN}[${_jail}]:${COLOR_RESET}"
    echo -e "${COLOR_GREEN}Applying template: ${TEMPLATE}...${COLOR_RESET}"

    ## TARGET
    if [ -s "${bastille_template}/TARGET" ]; then
        if grep -qw "${_jail}" "${bastille_template}/TARGET"; then
            echo -e "${COLOR_GREEN}TARGET: !${_jail}.${COLOR_RESET}"
            echo
            continue
        fi
    if ! grep -Eq "(^|\b)(${_jail}|ALL)($|\b)" "${bastille_template}/TARGET"; then
            echo -e "${COLOR_GREEN}TARGET: ?${_jail}.${COLOR_RESET}"
            echo
            continue
        fi
    fi

    # This is parsed outside the HOOKS loop so an ARG file can be used with a Bastillefile. -- cwells
    ARG_REPLACEMENTS=''
    if [ -s "${bastille_template}/ARG" ]; then
        while read _line; do
            if [ -z "${_line}" ]; then
                continue
            fi
            _arg_name=$(get_arg_name "${_line}")
            _arg_value=$(get_arg_value "${_line}" "$@")
            if [ -z "${_arg_value}" ]; then
                echo -e "${COLOR_YELLOW}No value provided for arg: ${_arg_name}${COLOR_RESET}"
            fi
            # Build a list of sed commands like this: -e 's/${username}/root/g' -e 's/${domain}/example.com/g'
            ARG_REPLACEMENTS="${ARG_REPLACEMENTS} -e 's/\${${_arg_name}}/${_arg_value}/g'"
        done < "${bastille_template}/ARG"
    fi

    if [ -s "${bastille_template}/Bastillefile" ]; then
        # Ignore blank lines and comments. -- cwells
        SCRIPT=$(grep -v '^\s*$' "${bastille_template}/Bastillefile" | grep -v '^\s*#')
        # Use a newline as the separator. -- cwells
        IFS='
'
        set -f
        for _line in ${SCRIPT}; do
            # First word converted to lowercase is the Bastille command. -- cwells
            _cmd=$(echo "${_line}" | awk '{print tolower($1);}')
            # Rest of the line with "arg" variables replaced will be the arguments. -- cwells
            _args=$(echo "${_line}" | awk '{$1=""; sub(/^ */, ""); print;}' | eval "sed ${ARG_REPLACEMENTS}")

            # Apply overrides for commands/aliases and arguments. -- cwells
            case $_cmd in
                arg) # This is a template argument definition. -- cwells
                    _arg_name=$(get_arg_name "${_args}")
                    _arg_value=$(get_arg_value "${_args}" "$@")
                    if [ -z "${_arg_value}" ]; then
                        echo -e "${COLOR_YELLOW}No value provided for arg: ${_arg_name}${COLOR_RESET}"
                    fi
                    # Build a list of sed commands like this: -e 's/${username}/root/g' -e 's/${domain}/example.com/g'
                    ARG_REPLACEMENTS="${ARG_REPLACEMENTS} -e 's/\${${_arg_name}}/${_arg_value}/g'"
                    continue
                    ;;
                cmd)
                    # Allow redirection within the jail. -- cwells
                    _args="sh -c '${_args}'"
                    ;;
                cp|copy)
                    _cmd='cp'
                    # Convert relative "from" path into absolute path inside the template directory. -- cwells
                    if [ "${_args%${_args#?}}" != '/' ]; then
                        _args="${bastille_template}/${_args}"
                    fi
                    ;;
                fstab|mount)
                    _cmd='mount' ;;
                include)
                    _cmd='template' ;;
                overlay)
                    _cmd='cp'
                    _args="${bastille_template}/${_args} /"
                    ;;
                pkg)
                    _args="install -y ${_args}" ;;
                render) # This is a path to one or more files needing arguments replaced by values. -- cwells
                    render "${bastille_jail_path}" "${_args}"
                    continue
                    ;;
            esac

            if ! eval "bastille ${_cmd} ${_jail} ${_args}"; then
                set +f
                unset IFS
                error_exit "Failed to execute command: ${_cmd}"
            fi

            post_command_hook "${_jail}" "${_cmd}" "${_args}"
        done
        set +f
        unset IFS
    fi

    for _hook in ${HOOKS}; do
        if [ -s "${bastille_template}/${_hook}" ]; then
            # Default command is the lowercase hook name and default args are the line from the file. -- cwells
            _cmd=$(echo "${_hook}" | awk '{print tolower($1);}')
            _args_template='${_line}'

            # Override default command/args for some hooks. -- cwells
            case ${_hook} in
                CONFIG)
                    echo -e "${COLOR_YELLOW}CONFIG deprecated; rename to OVERLAY.${COLOR_RESET}"
                    _args_template='${bastille_template}/${_line} /'
                    _cmd='cp' ;;
                FSTAB)
                    _cmd='mount' ;;
                INCLUDE)
                    _cmd='template' ;;
                OVERLAY)
                    _args_template='${bastille_template}/${_line} /'
                    _cmd='cp' ;;
                PF)
                    echo -e "${COLOR_GREEN}NOT YET IMPLEMENTED.${COLOR_RESET}"
                    continue ;;
                PRE)
                    _cmd='cmd' ;;
                RENDER) # This is a path to one or more files needing arguments replaced by values. -- cwells
                    render "${bastille_jail_path}" "${_line}"
                    continue
                    ;;
            esac

            echo -e "${COLOR_GREEN}[${_jail}]:${_hook} -- START${COLOR_RESET}"
            if [ "${_hook}" = 'CMD' ] || [ "${_hook}" = 'PRE' ]; then
                bastille cmd "${_jail}" /bin/sh < "${bastille_template}/${_hook}" || exit 1
            elif [ "${_hook}" = 'PKG' ]; then
                bastille pkg "${_jail}" install -y $(cat "${bastille_template}/PKG") || exit 1
                bastille pkg "${_jail}" audit -F
            else
                while read _line; do
                    if [ -z "${_line}" ]; then
                        continue
                    fi
                    # Replace "arg" variables in this line with the provided values. -- cwells
                    _line=$(echo "${_line}" | eval "sed ${ARG_REPLACEMENTS}")
                    eval "_args=\"${_args_template}\""
                    bastille "${_cmd}" "${_jail}" ${_args} || exit 1
                done < "${bastille_template}/${_hook}"
            fi
            echo -e "${COLOR_GREEN}[${_jail}]:${_hook} -- END${COLOR_RESET}"
            echo
        fi
    done

    echo -e "${COLOR_GREEN}Template complete.${COLOR_RESET}"
    echo
done